Generally — Most Areas
cast iron plant (zones 7-11) suits most of Pennsylvania (5b-8a) — zones 7-8 are in range, and the rest of the state is the exception.
Your yard isn't the whole zone.
Pennsylvania spans zones 5b-8a, but your yard sits in exactly one — and slope, tree cover, and cold-air pockets nudge it further. Enter your address and we'll score cast iron plant against your parcel's actual hardiness, soil, and sun.
We read public map data for this spot — soil, climate, flood, and parcel records. How we handle your address.
No card required · your full report in seconds
Zone Comparison
Cast Iron Plant Needs
- USDA Zones: 7-11
- Frost-Free Days: 120+
- Sun: Shade
- Mature size: 2 ft tall
- Drought tolerance: High
Pennsylvania Has
- USDA Zones: 5b-8a
- Last Hard Freeze (28°F): Apr 6 - Apr 24
- First Hard Freeze (28°F): Oct 25 - Nov 3
- Annual Rainfall: 36-48 inches
- Common Soils: Silt loam, Shale-derived, Limestone-derived
Plant Zone Range (zones 7-11)
Preferred Soil pH
Plant data: USDA PLANTS Database / Growable Ground plant catalog. State data: USDA ARS PHZM 2023, NOAA Climate Normals, NRCS SSURGO.
When to Plant Cast Iron Plant in Pennsylvania
The frost window
Across Pennsylvania, the last spring hard freeze (28°F) clears between Apr 6 and Apr 24, and the first fall hard freeze lands between Oct 25 and Nov 3 (NOAA Regional Climate Centers ACIS, 1991-2020). Counting from the latest last freeze to the earliest first freeze, that's a 184-day window you can count on — up to 211 days on a mild site in a kind year. That marks the hard freeze, not the last light frost, so tender transplants usually wait another 2-3 weeks.
Winter standing
Pennsylvania runs as cold as USDA zone 5, and no sourced winter-hardiness floor is on record for cast iron plant, so this page does not state whether it overwinters here — and gives no fall establishment date on the strength of a guess. Whether cast iron plant is a permanent planting or a replant-every-spring crop for you turns on your own zone within Pennsylvania; check its hardiness range against that before treating it as long-lived ground.
Frost window: NOAA Climate Normals 1991-2020. Plant timing fields: USDA PLANTS Database. Your site's own frost dates can run earlier or later than the state range — a parcel report pins them down.
Growing Season Fit
The zone check says cast iron plant survives winter in part of Pennsylvania, not across all of it. Whether the season is long enough — and warm enough — is a different question.
Frost-free days
Cast Iron Plant wants 120+ frost-free days; a typical Pennsylvania site sees ~197 (NOAA Regional Climate Centers ACIS, 1991-2020). That leaves comfortable headroom for succession planting.
GDD and chill-hour figures are computed from PRISM 1991-2020 monthly climate normals; frost-free days from NOAA Regional Climate Centers ACIS, 1991-2020. Each is the state median across its counties (P25/P75 span the within-state spread). Hardiness-zone range is USDA PHZM 2023.
Soil + Drainage Fit
Cast Iron Plant likes near-neutral soil (pH 5.5-7). That's the common-ground band across Pennsylvania's silt loam and shale-derived — a soil test confirms it for your site. It will grow across that whole span, but it does best between pH 5.5 and 6.5 — worth knowing before you decide whether a Pennsylvania soil test result is a problem or just a number. Drainage matters: this plant wants well (dry spells). If your Pennsylvania site is heavier clay or sits in a low spot, raised beds or amendment with compost solve it.
Plant pH and drainage requirements from USDA PLANTS Database. Pennsylvania soil profile from USDA NRCS SSURGO. Site-specific verification: a 30-minute soil test from your local Extension lab.
Cast Iron Plant in Pennsylvania — Quick Answer
- Verdict: Generally — Most Areas
- Plant Zones: 7-11 (USDA PLANTS Database)
- State Zones: 5b-8a (USDA ARS PHZM 2023)
- Growing Season: 28°F hard freezes about Apr 6 - Apr 24 to Oct 25 - Nov 3 (NOAA Regional Climate Centers ACIS, 1991-2020)
What Else to Consider for Cast Iron Plant in Pennsylvania
Zone compatibility tells you about winter cold survival — but Pennsylvania growers also need to think about:
Rocky shale soils in the ridge-and-valley region
Short mountain seasons in the Poconos and Alleghenies
Deer pressure is among the highest in the US
What to actually do about these — and the constraints that apply to every Pennsylvania grower, not just cast iron plant — is covered on the Pennsylvania growing guide.
Timing shifts within Pennsylvania
Cast Iron Plant needs about 120 days of frost-free season to complete its cycle. Even Potter County — Pennsylvania’s shortest season at 160 frost-free days — clears that by 40 days, so season length isn’t the constraint anywhere in Pennsylvania. What varies is your own parcel.
Across Pennsylvania’s 67 counties the frost-free season runs from 160 days in Potter County to 250 days in Philadelphia County — a spread of 90 days, which is why a single statewide planting date misleads. The median Pennsylvania county sees 197 frost-free days, leaving cast iron plant about 77 days of slack on a typical parcel — room for a second sowing where the season runs long.
County last-freeze dates and frost-free day counts: NOAA Regional Climate Centers ACIS (1991-2020), county 28°F freeze (earlier than the folk 32°F "last frost"). Cast Iron Plant's 120-day requirement: USDA PLANTS / Growable Ground plant database (minimum frost-free days). A parcel report resolves your address's own frost dates.
Where in Pennsylvania Fits Best
Even within Pennsylvania's zones 5b-8a, county microclimates differ enough to change what thrives. These counties carry the closest zone match for cast iron plant (USDA PHZM 2023):
Pennsylvania Cooperative Extension
For Pennsylvania-specific cultivar recommendations, planting calendars, and pest pressure for cast iron plant, the canonical source is Penn State Extension. Their fact sheets carry the local trial data we can't generalize across 50 states.
Is Cast Iron Plant native to Pennsylvania?
No — the USDA PLANTS Database lists Cast Iron Plant as introduced rather than native in the Lower 48, so it is not part of Pennsylvania's native flora. It grows here as a garden plant; pairing it with a few Pennsylvania natives keeps local pollinators fed too.
Looking for plants that belong here? The Pennsylvania growing guide lists USDA-documented natives for the state.
Native-range data: USDA PLANTS Database state-distribution records, accessed 2026-07-01.
Common Questions About Growing Cast Iron Plant in Pennsylvania
When can I plant Cast Iron Plant in Pennsylvania?
Pennsylvania's last spring hard freeze (28°F) clears between Apr 6 and Apr 24, and the first fall hard freeze lands between Oct 25 and Nov 3 (NOAA Regional Climate Centers ACIS, 1991-2020). No sourced winter-hardiness floor is on record for Cast Iron Plant, so this page does not state whether it overwinters in Pennsylvania and publishes no fall establishment date for it — check its hardiness range against your own zone before treating it as a permanent planting.
What hardiness zone is Cast Iron Plant grown in across Pennsylvania?
Pennsylvania spans USDA hardiness zones 5b-8a (USDA ARS PHZM 2023). Cast Iron Plant carries a range of zones 7-11, so the overlap zones are where outdoor growing is most reliable.
How many frost-free days does a typical Pennsylvania site have?
A typical Pennsylvania site sees ~197 frost-free days per year (derived from NOAA Regional Climate Centers ACIS, 1991-2020). Cast Iron Plant needs 120+ frost-free days, so check whether your local microclimate runs above or below the state average before settling on a planting date.
Is Cast Iron Plant native to Pennsylvania?
No — the USDA PLANTS Database lists Cast Iron Plant as introduced rather than native in the Lower 48, so it is not part of Pennsylvania's native flora. It grows here as a garden plant; pairing it with a few Pennsylvania natives keeps local pollinators fed too.
How should I amend the soil for Cast Iron Plant in Pennsylvania?
Cast Iron Plant prefers pH 5.5-7 and well (dry spells) drainage (Growable Ground Plant Database). That sits in the common-ground band across Pennsylvania soils — a 30-minute soil test from a local Extension lab confirms it for your specific site.
Will Cast Iron Plant actually grow on my specific land in Pennsylvania?
State-level zone + climate data is a sketch. A Growable Ground parcel report scores cast iron plant against your address's exact soil pH, drainage, sun, and frost-date data drawn from USDA SSURGO, NOAA, and PRISM — not state averages.
Check your specific parcel in Pennsylvania
State-level data is a sketch. Your Growable Ground report scores cast iron plant against your parcel's exact soil, sun, drainage, and frost data — not zone averages.
Three things about your lot that Pennsylvania cast iron plant averages can't show:
We read public map data around Pennsylvania — soil, climate, flood, and parcel records. How we handle your address.
25+ data sources read at your address, not the Pennsylvania cast iron plant average
Explore More
Growing guides for cast iron plant
Last updated: