lacebark elm (Ulmus parvifolia), photographi

Can I Grow Lacebark Elm in Kentucky?

USDA Zones 6a-7b · Plant zone range 6-9

Yes — Strong Match

lacebark elm (zones 6-9) covers every zone Kentucky contains (6a-7b), so hardiness is not what limits it anywhere in the state.

Lacebark Elm in Kentucky — the short answer

Lacebark Elm in Kentucky: hardy in zones 6–9, full sun.

Plant zones
6-9
Rated hardy to zone 5b by NC State Extension Gardener Plant Toolbox, checked Oct 2026. The source rates it slightly hardier than our range. Ceiling: not verified.
Kentucky zones
6a-7b
USDA PHZM 2023
Frost window
Mar 27 - Apr 2 – Nov 4 - Nov 10
NOAA RCC ACIS 1991-2020, 28°F
Shortest county season
195 days
NOAA Regional Climate Centers ACIS, 1991-2020, county 28°F killing freeze

Plant data: Growable Ground Plant Database, compiled from FAO ECOCROP, USDA PLANTS and university Extension sources — per-field provenance varies and is published with the dataset.

Score your parcel · free to start

Your yard isn't the whole zone.

Kentucky spans zones 6a-7b, but your yard sits in exactly one — and slope, tree cover, and cold-air pockets nudge it further. Enter your address and we'll score lacebark elm against your parcel's actual hardiness, soil, and sun.

We read public map data for this spot — soil, climate, flood, and parcel records. How we handle your address.

No card required · your parcel report in seconds — read in full free for your first 14 days

Kentucky is not one climate

Kentucky’s winter-low ladder runs across 120 counties, from zone 6.5 in Anderson County to zone 7.5 in Lyon County. That is 10°F between the two counties’ average coldest night — the difference between lacebark elm overwintering in the ground and coming under cover.

6.5 zonesAnderson County7.5 zonesLyon County

The middle half of 120 counties runs 6.5–7 zones, with a median of 7 zones — a 1-zone span end to end.

Measured across 120 Kentucky counties. USDA PHZM 2023, per county. Quartiles are order statistics — every figure shown is a value a real county recorded, not an interpolation. Your own site sits somewhere inside this range; a parcel report resolves where.

Where in Kentucky Fits Best

Even within Kentucky's zones 6a-7b, county microclimates differ enough to change what thrives. These counties carry the closest zone match for lacebark elm (USDA PHZM 2023):

Zone Comparison

Lacebark Elm Needs

  • USDA Zones: 6-9
  • Sun: Full Sun
  • Mature size: 50 ft tallWe haven't confirmed this against a published source yet.
  • Drought tolerance: High

Kentucky Has

  • USDA Zones: 6a-7b
  • Last Hard Freeze (28°F): Mar 27 - Apr 2
  • First Hard Freeze (28°F): Nov 4 - Nov 10
  • Annual Rainfall: 42-52 inches
  • Common Soils: Silt loam, Clay loam, Limestone-derived

Plant Zone Range (zones 6-9)

6a
9b
3a (Cold)13b (Hot)

Preferred Soil pH

3.5 (Acidic)7.0 (Neutral)9.0 (Alkaline)
Highlighted range: pH 4.8 – 7.0

Plant data: Growable Ground Plant Database, compiled from FAO ECOCROP, USDA PLANTS, and university Extension sources — per-field provenance varies and is published with the dataset. State data: USDA ARS PHZM 2023, NOAA Climate Normals, NRCS SSURGO.

When to Plant Lacebark Elm in Kentucky

The frost window

Across Kentucky, the last spring hard freeze (28°F) clears between Mar 27 and Apr 2, and the first fall hard freeze lands between Nov 4 and Nov 10 (NOAA Regional Climate Centers ACIS, 1991-2020). Counting from the latest last freeze to the earliest first freeze, that's a 216-day window you can count on — up to 228 days on a mild site in a kind year. That marks the hard freeze, not the last light frost, so tender transplants usually wait another 2-3 weeks.

Winter standing

Kentucky runs as cold as USDA zone 6, and no sourced winter-hardiness floor is on record for lacebark elm, so this page does not state whether it overwinters here — and gives no fall establishment date on the strength of a guess. Whether lacebark elm is a permanent planting or a replant-every-spring crop for you turns on your own zone within Kentucky; check its hardiness range against that before treating it as long-lived ground.

Frost window: NOAA Climate Normals 1991-2020. Plant timing fields: Growable Ground Plant Database — frost-free days from FAO ECOCROP, days to harvest from university Extension production guides, and growing-degree-day and chill-hour minimums that are compilation estimates rather than published figures. Your site's own frost dates can run earlier or later than the state range — a parcel report pins them down.

Growing Season Fit

The zone check says lacebark elm survives winter here. Whether the season is long enough — and warm enough — is a different question.

Chill hours

Lacebark Elm requires ~300 chill hours (32-45°F dormancy window). Kentucky typically banks ~2500 chill hours per winter (from PRISM 1991-2020 climate normals), which keeps this plant on track.

GDD and chill-hour figures are computed from PRISM 1991-2020 monthly climate normals; frost-free days from NOAA Regional Climate Centers ACIS, 1991-2020. Each is the state median across its counties (P25/P75 span the within-state spread). Hardiness-zone range is USDA PHZM 2023.

Soil + Drainage Fit

Lacebark Elm likes near-neutral soil (pH 4.8-7). That's the common-ground band across Kentucky's silt loam and clay loam — a soil test confirms it for your site. It will grow across that whole span, but it does best between pH 6 and 7.5 — worth knowing before you decide whether a Kentucky soil test result is a problem or just a number. Drainage matters: this plant wants well (dry spells). If your Kentucky site is heavier clay or sits in a low spot, a raised bed lifts the roots above wet ground, or work in compost. Preferred pH and drainage need: We haven't confirmed this against a published source yet.

Plant pH requirements: FAO ECOCROP and USDA PLANTS, with the remaining rows from other published sources or Growable Ground compilation. Drainage: FAO ECOCROP, with the remaining rows from other published sources or Growable Ground compilation. Kentucky soil profile from USDA NRCS SSURGO. Site-specific verification: a 30-minute soil test from your local Extension lab.

What Else to Consider for Lacebark Elm in Kentucky

Zone compatibility tells you about winter cold survival — but Kentucky growers also need to think about:

Heavy clay soils in the Bluegrass region

High humidity promotes fungal diseases

Karst topography creates drainage unpredictability

What to actually do about these — and the constraints that apply to every Kentucky grower, not just lacebark elm — is covered on the Kentucky growing guide.

Where in Kentucky Lacebark Elm Is Zone-Hardy

Lacebark Elm is rated for USDA zones 6–9. Every one of Kentucky’s 120 counties sits inside that band — from Anderson County at zone 6b to Lyon County at zone 7b — so winter cold is not what decides this plant anywhere in the state. What is left to vary is your own parcel: slope, shelter and cold-air drainage routinely move a site half a zone either way from the county figure.

Across those 120 counties Kentucky’s winter-low ladder runs from zone 6b in Anderson County to zone 7b in Lyon County — 1 USDA zone of spread, which is 10°F between the two counties’ average coldest night of the year. That is why a statewide hardiness answer is where you start and not where you finish.

The planting window moves with it. Greenup County holds its last hard freeze (28°F) until about Apr 13, while Livingston County is clear by Mar 18 — 26 days apart. Set lacebark elm out on your county’s date, not the state’s.

County hardiness zones: USDA Plant Hardiness Zone Map (PHZM) 2023, per county. County last-freeze dates: NOAA Regional Climate Centers ACIS (1991-2020), county 28°F killing freeze — earlier than the folk 32°F "last frost". Lacebark Elm’s zone 6–9 band: Rated hardy to zone 5b by NC State Extension Gardener Plant Toolbox, checked Oct 2026. The source rates it slightly hardier than our range. Ceiling: not verified.. A parcel report resolves your address’s own zone and frost dates rather than its county’s.

Kentucky Cooperative Extension

For Kentucky-specific cultivar recommendations, planting calendars, and pest pressure for lacebark elm, the canonical source is University of Kentucky Cooperative Extension. Their fact sheets carry the local trial data we can't generalize across 50 states.

Is Lacebark Elm native to Kentucky?

No — the USDA PLANTS Database lists Lacebark Elm as introduced rather than native in the Lower 48, so it is not part of Kentucky's native flora. It grows here as a garden plant; pairing it with a few Kentucky natives keeps local pollinators fed too.

Looking for plants that belong here? The Kentucky growing guide lists plants that USDA PLANTS records growing in Kentucky and that Kew and NatureServe Explorer both list in its native range, leaving out any that NatureServe flags as exotic there or that our audit holds.

State records: USDA PLANTS Database state-distribution data (presence, not state-level nativity), accessed 2026-10-19.

Common Questions About Growing Lacebark Elm in Kentucky

When can I plant Lacebark Elm in Kentucky?

Kentucky's last spring hard freeze (28°F) clears between Mar 27 and Apr 2, and the first fall hard freeze lands between Nov 4 and Nov 10 (NOAA Regional Climate Centers ACIS, 1991-2020). No sourced winter-hardiness floor is on record for Lacebark Elm, so this page does not state whether it overwinters in Kentucky and publishes no fall establishment date for it — check its hardiness range against your own zone before treating it as a permanent planting.

What hardiness zone is Lacebark Elm grown in across Kentucky?

Kentucky spans USDA hardiness zones 6a-7b (USDA ARS PHZM 2023). Lacebark Elm carries a range of zones 6-9, so the overlap zones are where outdoor growing is most reliable.

How many frost-free days does a typical Kentucky site have?

A typical Kentucky site sees ~221 frost-free days per year (derived from NOAA Regional Climate Centers ACIS, 1991-2020). Lacebark Elm needs 160+ frost-free days, so check whether your local microclimate runs above or below the state average before settling on a planting date.

Is Lacebark Elm native to Kentucky?

No — the USDA PLANTS Database lists Lacebark Elm as introduced rather than native in the Lower 48, so it is not part of Kentucky's native flora. It grows here as a garden plant; pairing it with a few Kentucky natives keeps local pollinators fed too.

How should I amend the soil for Lacebark Elm in Kentucky?

Lacebark Elm prefers pH 4.8-7 and well (dry spells) drainage. We haven't confirmed this against a published source yet. That sits in the common-ground band across Kentucky soils — a 30-minute soil test from a local Extension lab confirms it for your specific site.

Will Lacebark Elm actually grow on my specific land in Kentucky?

State-level zone + climate data is a sketch. A Growable Ground parcel report scores lacebark elm against your address's mapped soil pH, drainage, sun, and frost-date data drawn from USDA SSURGO, NOAA, and PRISM — not state averages.

Free to start

Check your specific parcel in Kentucky

State-level data is a sketch. Your Growable Ground report scores lacebark elm against your land's mapped soil, modelled sun, drainage, and frost data — not zone averages.

Three things about your lot that Kentucky lacebark elm averages can't show:

Your soil pHYour frost-free days — Kentucky averages 221Your sun & shade

We read public map data around Kentucky — soil, climate, flood, and parcel records. How we handle your address.

25+ data sources read at your address, not the Kentucky lacebark elm average

Explore More

Explore Kentucky county by county

Kentucky carries 120 counties with their own USDA zone — a sample of the growing pages for lacebark elm there:

Where else lacebark elm grows

Lacebark Elm's zone band crosses state lines — these are the states closest to Kentucky in winter climate where it also has a page, plus the far ends of its range. Each one re-answers the question with that state's own record.

More to grow in Kentucky

Kentucky has a growing page for 889 plants — a rotating sample of the rest of the shelf.

Last updated: