Generally — Most Areas
American elm (zones 3-9) suits most of Alaska (1a-9a) — zones 3-9 are in range, and the rest of the state is the exception.
American Elm in Alaska — the short answer
American Elm in Alaska: hardy in zones 3–9, part sun, against a state median of ~147 frost-free days.
- Plant zones
- 3-9
- Manual horticultural correction (source not retained); NC State Extension and Missouri Botanical Garden, with the remaining rows from other published sources or Growable Ground compilation
- Alaska zones
- 1a-9a
- USDA PHZM 2023
- Frost window
- Apr 16 - May 15 – Sep 24 - Oct 29
- NOAA RCC ACIS 1991-2020, 28°F
- Shortest county season
- 85 days
- NOAA Regional Climate Centers ACIS station record, 1991-2020, county 28°F killing freeze
Plant data: Growable Ground Plant Database, compiled from FAO ECOCROP, USDA PLANTS and university Extension sources — per-field provenance varies and is published with the dataset.
Your yard isn't the whole zone.
Alaska spans zones 1a-9a, but your yard sits in exactly one — and slope, tree cover, and cold-air pockets nudge it further. Enter your address and we'll score american elm against your parcel's actual hardiness, soil, and sun.
We read public map data for this spot — soil, climate, flood, and parcel records. How we handle your address.
No card required · your full report in seconds
Alaska is not one climate
A single Alaska answer averages 28 counties whose growing seasons are 155 days apart — from 85 frost-free days in Southeast Fairbanks County to 240 in Sitka County. Which end of that your land sits nearer changes what american elm can finish before the first hard freeze.
The middle half of 28 counties runs 118–196 days, with a median of 145 days — a 155-day span end to end.
Measured across 28 Alaska counties. NOAA Regional Climate Centers ACIS station record, 1991-2020, county 28°F killing freeze. Quartiles are order statistics — every figure shown is a value a real county recorded, not an interpolation. Your own site sits somewhere inside this range; a parcel report resolves where.
Where in Alaska Fits Best
Even within Alaska's zones 1a-9a, county microclimates differ enough to change what thrives. These counties carry the closest zone match for american elm (USDA PHZM 2023):
Zone Comparison
American Elm Needs
- USDA Zones: 3-9
- Sun: Part Sun
- Mature size: 80 ft tall
- Drought tolerance: Medium
Alaska Has
- USDA Zones: 1a-9a
- Last Hard Freeze (28°F): Apr 16 - May 15
- First Hard Freeze (28°F): Sep 24 - Oct 29
- Annual Rainfall: 10-160 inches
- Common Soils: Permafrost, Glacial silt, Volcanic ash
Plant Zone Range (zones 3-9)
Preferred Soil pH
Plant data: Growable Ground Plant Database, compiled from FAO ECOCROP, USDA PLANTS, and university Extension sources — per-field provenance varies and is published with the dataset. State data: USDA ARS PHZM 2023, NOAA Climate Normals, NRCS SSURGO.
When to Plant American Elm in Alaska
The frost window
Across Alaska, the last spring hard freeze (28°F) clears between Apr 16 and May 15, and the first fall hard freeze lands between Sep 24 and Oct 29 (NOAA Regional Climate Centers ACIS, 1991-2020). Counting from the latest last freeze to the earliest first freeze, that's a 132-day window you can count on — up to 196 days on a mild site in a kind year. That marks the hard freeze, not the last light frost, so tender transplants usually wait another 2-3 weeks.
Winter standing
Alaska runs as cold as USDA zone 1, and no sourced winter-hardiness floor is on record for american elm, so this page does not state whether it overwinters here — and gives no fall establishment date on the strength of a guess. Whether american elm is a permanent planting or a replant-every-spring crop for you turns on your own zone within Alaska; check its hardiness range against that before treating it as long-lived ground.
Timing tuned to sub-state frost dates — North Slope County, not the statewide average.
Frost window: NOAA Climate Normals 1991-2020. Plant timing fields: Growable Ground Plant Database — frost-free days from FAO ECOCROP, days to harvest from university Extension production guides, and growing-degree-day and chill-hour minimums that are compilation estimates rather than published figures. Your site's own frost dates can run earlier or later than the state range — a parcel report pins them down.
Soil + Drainage Fit
American Elm tolerates a wide pH range (pH 5-8) — 3 units, acid ground through alkaline — so soil acidity is rarely what limits it in Alaska. A soil test is still worth having, but for what else it tells you about this site, not to clear this plant.
Your land, not the state average
Alaska's soils run mostly silt loam, but SSURGO maps the series, texture, and drainage under your exact parcel. What matters for american elm is the horizon its roots actually work, not the surface. That map unit, not the state average, decides how american elm performs.
Check your parcel → Source: USDA NRCS SSURGO.
Plant pH requirements: FAO ECOCROP and USDA PLANTS, with the remaining rows from other published sources or Growable Ground compilation. Drainage: FAO ECOCROP, with the remaining rows from other published sources or Growable Ground compilation. Alaska soil profile from USDA NRCS SSURGO. Site-specific verification: a 30-minute soil test from your local Extension lab.
What Else to Consider for American Elm in Alaska
Zone compatibility tells you about winter cold survival — but Alaska growers also need to think about:
Extremely short growing season (70-110 frost-free days)
Permafrost prevents deep root growth in many areas
Limited soil development in glacial terrain
Growing american elm here specifically
American Elm needs pH 5.0–8.0; Alaska's dominant silt loam soils may or may not deliver that, so your parcel's SSURGO map unit is the real test.
Start with a soil test on your own ground and adjust pH and texture to fit american elm's 5.0–8.0 range. How to handle it →
What to actually do about these — and the constraints that apply to every Alaska grower, not just american elm — is covered on the Alaska growing guide.
Timing shifts within Alaska
Alaska isn't one climate. In North Slope County, the last hard freeze (28°F) holds until about Jun 7 — roughly 33 days later than the recorded state median — so plant american elm to your county's window, not the statewide date.
County last-freeze dates: NOAA Regional Climate Centers ACIS (1991-2020), county 28°F freeze (earlier than the folk 32°F "last frost"). A parcel report resolves your address's own frost dates.
Where in Alaska American Elm Is Zone-Hardy
American Elm is rated for USDA zones 3–9. Every one of Alaska’s 30 counties sits inside that band — from Aleutians East County at zone 3a-4b to Yukon-Koyukuk County at zone 3a-4b — so winter cold is not what decides this plant anywhere in the state. What is left to vary is your own parcel: slope, shelter and cold-air drainage routinely move a site half a zone either way from the county figure.
Across those 30 counties Alaska’s winter-low ladder runs from zone 3a-4b in Aleutians East County to zone 3a-4b in Yukon-Koyukuk County — 1.5 USDA zones of spread, which is 15°F between the two counties’ average coldest night of the year. That is why a statewide hardiness answer is where you start and not where you finish.
The planting window moves with it. North Slope County holds its last hard freeze (28°F) until about Jun 7, while Sitka County is clear by Mar 24 — 75 days apart. Set american elm out on your county’s date, not the state’s.
County hardiness zones: USDA Plant Hardiness Zone Map (PHZM) 2023, per county. County last-freeze dates: NOAA Regional Climate Centers ACIS (1991-2020), county 28°F killing freeze — earlier than the folk 32°F "last frost". American Elm’s zone 3–9 band: USDA PLANTS / Growable Ground plant database. A parcel report resolves your address’s own zone and frost dates rather than its county’s.
Alaska Cooperative Extension
For Alaska-specific cultivar recommendations, planting calendars, and pest pressure for american elm, the canonical source is UAF Cooperative Extension Service. Their fact sheets carry the local trial data we can't generalize across 50 states.
Is American Elm native to Alaska?
American Elm is native to parts of the Lower 48, but the USDA PLANTS Database (accessed 2026-07-01) does not document a native range in Alaska. It can still earn a place in a Alaska garden — the zone comparison above tells you whether it will thrive.
Looking for plants that belong here? The Alaska growing guide lists USDA-documented natives for the state.
Native-range data: USDA PLANTS Database state-distribution records, accessed 2026-07-01.
Common Questions About Growing American Elm in Alaska
When can I plant American Elm in Alaska?
Alaska's last spring hard freeze (28°F) clears between Apr 16 and May 15, and the first fall hard freeze lands between Sep 24 and Oct 29 (NOAA Regional Climate Centers ACIS, 1991-2020). No sourced winter-hardiness floor is on record for American Elm, so this page does not state whether it overwinters in Alaska and publishes no fall establishment date for it — check its hardiness range against your own zone before treating it as a permanent planting.
What hardiness zone is American Elm grown in across Alaska?
Alaska spans USDA hardiness zones 1a-9a (USDA ARS PHZM 2023). American Elm carries a range of zones 3-9, so the overlap zones are where outdoor growing is most reliable.
How many frost-free days does a typical Alaska site have?
A typical Alaska site sees ~147 frost-free days per year (derived from NOAA Regional Climate Centers ACIS station record, 1991-2020). American Elm should be matched against that window, so check whether your local microclimate runs above or below the state average before settling on a planting date. In cooler counties like North Slope, the freeze-free season runs shorter than the state average, so verify your own county's window.
Is American Elm native to Alaska?
American Elm is native to parts of the Lower 48, but the USDA PLANTS Database (accessed 2026-07-01) does not document a native range in Alaska. It can still earn a place in a Alaska garden — the zone comparison above tells you whether it will thrive.
How should I amend the soil for American Elm in Alaska?
American Elm tolerates pH 5-8 (USDA PLANTS). That is a 3-unit span, acid ground through alkaline, so pH is rarely what limits this plant on a Alaska site — amend for drainage and organic matter first.
Will American Elm actually grow on my specific land in Alaska?
State-level zone + climate data is a sketch. A Growable Ground parcel report scores american elm against your address's exact soil pH, drainage, sun, and frost-date data drawn from USDA SSURGO, NOAA, and PRISM — not state averages.
Check your specific parcel in Alaska
State-level data is a sketch. Your Growable Ground report scores american elm against your parcel's exact soil, sun, drainage, and frost data — not zone averages.
Three things about your lot that Alaska american elm averages can't show:
We read public map data around Alaska — soil, climate, flood, and parcel records. How we handle your address.
25+ data sources read at your address, not the Alaska american elm average
Explore More
Growing guides for american elm
Analysis by the Growable Ground research team, grounded in USDA PLANTS, USDA NRCS SSURGO, NOAA Climate Normals (1991-2020), and named Cooperative Extension sources. How we know →
Cite this dataset
Kirchick, M. (2026). Growable Ground Plant Database [Data set]. Zenodo. https://doi.org/10.5281/zenodo.21435643
Licensed CC BY-NC 4.0. DOI 10.5281/zenodo.21435643
Last updated: