Generally — Most Areas
lablab (zones 7-13) suits most of North Carolina (6a-9a) — zones 7-9 are in range, and the rest of the state is the exception.
Lablab in North Carolina — the short answer
Lablab in North Carolina: hardy in zones 7–13, full sun, against a state median of ~245 frost-free days.
- Plant zones
- 7-13
- Manual horticultural correction (source not retained); NC State Extension and Missouri Botanical Garden, with the remaining rows from other published sources or Growable Ground compilation
- North Carolina zones
- 6a-9a
- USDA PHZM 2023
- Frost window
- Mar 11 - Mar 24 – Nov 10 - Nov 25
- NOAA RCC ACIS 1991-2020, 28°F
- Shortest county season
- 178 days
- NOAA Regional Climate Centers ACIS, 1991-2020, county 28°F killing freeze
- Days to maturity
- 90 days
- Growable Ground Plant Database
Plant data: Growable Ground Plant Database, compiled from FAO ECOCROP, USDA PLANTS and university Extension sources — per-field provenance varies and is published with the dataset.
Your yard isn't the whole zone.
North Carolina spans zones 6a-9a, but your yard sits in exactly one — and slope, tree cover, and cold-air pockets nudge it further. Enter your address and we'll score lablab against your parcel's actual hardiness, soil, and sun.
We read public map data for this spot — soil, climate, flood, and parcel records. How we handle your address.
No card required · your full report in seconds
North Carolina is not one climate
North Carolina’s winter-low ladder runs across 100 counties, from zone 6.5 in Avery County to zone 9 in Dare County. That is 25°F between the two counties’ average coldest night — the difference between lablab overwintering in the ground and coming under cover.
The middle half of 100 counties runs 7.5–8 zones, with a median of 8 zones — a 2.5-zone span end to end.
Measured across 100 North Carolina counties. USDA PHZM 2023, per county. Quartiles are order statistics — every figure shown is a value a real county recorded, not an interpolation. Your own site sits somewhere inside this range; a parcel report resolves where.
Where in North Carolina Fits Best
Lablab is rated for zones 7–13 — a cold floor USDA puts at 0 to 10°F. Against North Carolina’s 100 counties that band holds in 96 of them, and the line runs at Alleghany County (zone 7a), the coldest county still inside it.
Inside zones 7–13
96 counties
- Ashe County · zone 7a
- Haywood County · zone 7a
- Madison County · zone 7a
3 of 96 shown
Below the zone 7 floor
4 counties
- Avery County · zone 6b
- Swain County · zone 6b
- Watauga County · zone 6b
3 of 4 shown
Winter cold is the limit here — the same plant works in a container that comes under cover.
County hardiness zones: USDA Plant Hardiness Zone Map (PHZM) 2023, per county. A zone is a 10°F band of average annual extreme minimum temperature, so the floor above is the band the plant's rating denotes, not a single measured kill point. Slope, shelter and cold-air drainage routinely move a site half a zone either way from its county figure — which is the part only your address resolves.
Even within North Carolina's zones 6a-9a, county microclimates differ enough to change what thrives. These counties carry the closest zone match for lablab (USDA PHZM 2023):
Zone Comparison
Lablab Needs
- USDA Zones: 7-13
- Frost-Free Days: 70+
- Sun: Full Sun
- Mature size: 4 ft tall
- Drought tolerance: High
North Carolina Has
- USDA Zones: 6a-9a
- Last Hard Freeze (28°F): Mar 11 - Mar 24
- First Hard Freeze (28°F): Nov 10 - Nov 25
- Annual Rainfall: 40-60 inches
- Common Soils: Red clay (Piedmont), Sandy loam (Coastal), Mountain loam
Plant Zone Range (zones 7-13)
Preferred Soil pH
Plant data: Growable Ground Plant Database, compiled from FAO ECOCROP, USDA PLANTS, and university Extension sources — per-field provenance varies and is published with the dataset. State data: USDA ARS PHZM 2023, NOAA Climate Normals, NRCS SSURGO.
When to Plant Lablab in North Carolina
The frost window
Across North Carolina, the last spring hard freeze (28°F) clears between Mar 11 and Mar 24, and the first fall hard freeze lands between Nov 10 and Nov 25 (NOAA Regional Climate Centers ACIS, 1991-2020). Counting from the latest last freeze to the earliest first freeze, that's a 231-day window you can count on — up to 259 days on a mild site in a kind year. That marks the hard freeze, not the last light frost, so tender transplants usually wait another 2-3 weeks.
When to start the seed
Lablab is direct-sown where it grows rather than started under cover, so there is no seed-tray head start to bank — North Carolina's dates above are the whole calendar for it. That makes the last-freeze date the binding constraint, and a warmer pocket of your own yard is worth more to this crop than it is to a transplanted one.
Winter standing
North Carolina runs as cold as USDA zone 6, and no sourced winter-hardiness floor is on record for lablab, so this page does not state whether it overwinters here — and gives no fall establishment date on the strength of a guess. Whether lablab is a permanent planting or a replant-every-spring crop for you turns on your own zone within North Carolina; check its hardiness range against that before treating it as long-lived ground.
Frost window: NOAA Climate Normals 1991-2020. Plant timing fields: Growable Ground Plant Database — frost-free days from FAO ECOCROP, days to harvest from university Extension production guides, and growing-degree-day and chill-hour minimums that are compilation estimates rather than published figures. Your site's own frost dates can run earlier or later than the state range — a parcel report pins them down.
Growing Season Fit
The zone check says lablab survives winter in part of North Carolina, not across all of it. Whether the season is long enough — and warm enough — is a different question.
Frost-free days
Lablab wants 70+ frost-free days; a typical North Carolina site sees ~245 (NOAA Regional Climate Centers ACIS, 1991-2020). That leaves comfortable headroom for succession planting.
Growing degree days
Lablab needs ~2500 GDD (base 50°F) to ripen. The state median runs ~4537 GDD (from PRISM 1991-2020 climate normals), so North Carolina's typical season clears that easily.
GDD and chill-hour figures are computed from PRISM 1991-2020 monthly climate normals; frost-free days from NOAA Regional Climate Centers ACIS, 1991-2020. Each is the state median across its counties (P25/P75 span the within-state spread). Hardiness-zone range is USDA PHZM 2023.
Soil + Drainage Fit
Lablab tolerates a wide pH range (pH 4.5-8) — 3.5 units, acid ground through alkaline — so soil acidity is rarely what limits it in North Carolina. A soil test is still worth having, but for what else it tells you about this site, not to clear this plant. It will grow across that whole span, but it does best between pH 5 and 7.5 — worth knowing before you decide whether a North Carolina soil test result is a problem or just a number. Drainage matters: this plant wants well (dry spells). If your North Carolina site is heavier clay or sits in a low spot, raised beds or amendment with compost solve it.
Plant pH requirements: FAO ECOCROP and USDA PLANTS, with the remaining rows from other published sources or Growable Ground compilation. Drainage: FAO ECOCROP, with the remaining rows from other published sources or Growable Ground compilation. North Carolina soil profile from USDA NRCS SSURGO. Site-specific verification: a 30-minute soil test from your local Extension lab.
What Else to Consider for Lablab in North Carolina
Zone compatibility tells you about winter cold survival — but North Carolina growers also need to think about:
Red Piedmont clay is hard to work and drains poorly
Humidity drives significant disease pressure
Hurricane risk on the coastal plain
What to actually do about these — and the constraints that apply to every North Carolina grower, not just lablab — is covered on the North Carolina growing guide.
Timing shifts within North Carolina
Lablab needs about 70 days of frost-free season to complete its cycle. Even Swain County — North Carolina’s shortest season at 178 frost-free days — clears that by 108 days, so season length isn’t the constraint anywhere in North Carolina. What varies is your own parcel.
Across North Carolina’s 100 counties the frost-free season runs from 178 days in Swain County to 303 days in Dare County — a spread of 125 days, which is why a single statewide planting date misleads. The median North Carolina county sees 245 frost-free days, leaving lablab about 175 days of slack on a typical parcel — room for a second sowing where the season runs long.
County last-freeze dates and frost-free day counts: NOAA Regional Climate Centers ACIS (1991-2020), county 28°F freeze (earlier than the folk 32°F "last frost"). Lablab's 70-day requirement: USDA PLANTS / Growable Ground plant database (minimum frost-free days). A parcel report resolves your address's own frost dates.
Pollinator + Wildlife Value
Lablab draws honeybees and native bees (moderate value, Growable Ground Plant Database). Planting it near vegetable beds can lift fruit set on neighboring crops. Outdoors, lablab can only work that bloom inside North Carolina's frost window — roughly 245 days, opening after the last 28°F freeze (Mar 11 - Mar 24) and closing at the first (Nov 10 - Nov 25), per NOAA Regional Climate Centers ACIS, 1991-2020.
North Carolina Cooperative Extension
For North Carolina-specific cultivar recommendations, planting calendars, and pest pressure for lablab, the canonical source is NC State Extension. Their fact sheets carry the local trial data we can't generalize across 50 states.
Is Lablab native to North Carolina?
No — the USDA PLANTS Database lists Lablab as introduced rather than native in the Lower 48, so it is not part of North Carolina's native flora. It grows here as a garden plant; pairing it with a few North Carolina natives keeps local pollinators fed too.
Looking for plants that belong here? The North Carolina growing guide lists USDA-documented natives for the state.
Native-range data: USDA PLANTS Database state-distribution records, accessed 2026-07-01.
Common Questions About Growing Lablab in North Carolina
When can I plant Lablab in North Carolina?
North Carolina's last spring hard freeze (28°F) clears between Mar 11 and Mar 24, and the first fall hard freeze lands between Nov 10 and Nov 25 (NOAA Regional Climate Centers ACIS, 1991-2020). No sourced winter-hardiness floor is on record for Lablab, so this page does not state whether it overwinters in North Carolina and publishes no fall establishment date for it — check its hardiness range against your own zone before treating it as a permanent planting.
What hardiness zone is Lablab grown in across North Carolina?
North Carolina spans USDA hardiness zones 6a-9a (USDA ARS PHZM 2023). Lablab carries a range of zones 7-13, so the overlap zones are where outdoor growing is most reliable.
How many frost-free days does a typical North Carolina site have?
A typical North Carolina site sees ~245 frost-free days per year (derived from NOAA Regional Climate Centers ACIS, 1991-2020). Lablab needs 70+ frost-free days, so check whether your local microclimate runs above or below the state average before settling on a planting date.
Is Lablab native to North Carolina?
No — the USDA PLANTS Database lists Lablab as introduced rather than native in the Lower 48, so it is not part of North Carolina's native flora. It grows here as a garden plant; pairing it with a few North Carolina natives keeps local pollinators fed too.
How should I amend the soil for Lablab in North Carolina?
Lablab tolerates pH 4.5-8 and well (dry spells) drainage (FAO ECOCROP). That is a 3.5-unit span, acid ground through alkaline, so pH is rarely what limits this plant on a North Carolina site — amend for drainage and organic matter first.
Will Lablab actually grow on my specific land in North Carolina?
State-level zone + climate data is a sketch. A Growable Ground parcel report scores lablab against your address's exact soil pH, drainage, sun, and frost-date data drawn from USDA SSURGO, NOAA, and PRISM — not state averages.
Check your specific parcel in North Carolina
State-level data is a sketch. Your Growable Ground report scores lablab against your parcel's exact soil, sun, drainage, and frost data — not zone averages.
Three things about your lot that North Carolina lablab averages can't show:
We read public map data around North Carolina — soil, climate, flood, and parcel records. How we handle your address.
25+ data sources read at your address, not the North Carolina lablab average
Explore More
Growing guides for lablab
Last updated: