mache (Valerianella locusta), photographi

Can I Grow Mache in North Carolina?

USDA Zones 6a-9a · Plant zone range Data pending

Yes — Strong Match

mache is grown as an annual, so season length decides it here, not a winter zone — and North Carolina's typical season runs ~245 frost-free days against the ~45 mache needs.

Sow by about Sep 28

Mache is grown as an annual, so what decides it here is season length, not a winter zone. It needs about 45 frost-free days and a typical North Carolina season runs ~245 frost-free days, leaving 200 days of slack. That is room to sow as late as about Sep 28 and still finish before the usual first freeze (Nov 17), or to run a second succession.

Want more weeks at either end of that window? How to buy the weeks →

45 frost-free days required against North Carolina’s ~245-day season. NOAA Regional Climate Centers ACIS 1991-2020 (28°F killing freeze), state median across counties, via stateClimateData.ts.

Mache in North Carolina — the short answer

Mache in North Carolina: full sun, against a state median of ~245 frost-free days.

North Carolina zones
6a-9a
USDA PHZM 2023
Frost window
Mar 11 - Mar 24 – Nov 10 - Nov 25
NOAA RCC ACIS 1991-2020, 28°F
Shortest county season
178 days
NOAA Regional Climate Centers ACIS, 1991-2020, county 28°F killing freeze
Days to maturity
50 days
Growable Ground Plant Database

Plant data: Growable Ground Plant Database, compiled from FAO ECOCROP, USDA PLANTS and university Extension sources — per-field provenance varies and is published with the dataset.

Score your parcel · free to start

Your yard isn't the whole zone.

Mache is grown as an annual, so your winter zone isn't the deciding factor — your frost-free window is. A typical North Carolina site runs ~245 frost-free days, but that is a state median, not your yard: slope, trees, and low spots move the last-frost date across a single parcel. Enter your address and we'll score mache against your land's actual frost dates, sun, and soil.

We read public map data for this spot — soil, climate, flood, and parcel records. How we handle your address.

No card required · your parcel report in seconds — read in full free for your first 14 days

mache (Valerianella locusta), photograph
Photo: Jochen Knabben · CC BY-SA · via GBIF

North Carolina is not one climate

A single North Carolina answer averages 100 counties whose growing seasons are 125 days apart — from 178 frost-free days in Swain County to 303 in Dare County. Which end of that your land sits nearer changes what mache can finish before the first hard freeze.

178 daysSwain County303 daysDare County

The middle half of 100 counties runs 230–257 days, with a median of 245 days — a 125-day span end to end.

Measured across 100 North Carolina counties. NOAA Regional Climate Centers ACIS, 1991-2020, county 28°F killing freeze. Quartiles are order statistics — every figure shown is a value a real county recorded, not an interpolation. Your own site sits somewhere inside this range; a parcel report resolves where.

Zone Comparison

Mache Needs

  • USDA Zones: Data pending
  • Frost-Free Days: 45+
  • Sun: Full SunWe haven't confirmed this against a published source yet.
  • Mature size: 6 in tallWe haven't confirmed this against a published source yet.
  • Picking window: ~21 days of harvestWe haven't confirmed this against a published source yet.
  • Drought tolerance: LowWe haven't confirmed this against a published source yet.

North Carolina Has

  • USDA Zones: 6a-9a
  • Last Hard Freeze (28°F): Mar 11 - Mar 24
  • First Hard Freeze (28°F): Nov 10 - Nov 25
  • Annual Rainfall: 40-60 inches
  • Common Soils: Red clay (Piedmont), Sandy loam (Coastal), Mountain loam

Preferred Soil pH

3.5 (Acidic)7.0 (Neutral)9.0 (Alkaline)
Highlighted range: pH 6.0 – 7.5

We haven't confirmed this against a published source yet.

Plant data: Growable Ground Plant Database, compiled from FAO ECOCROP, USDA PLANTS, and university Extension sources — per-field provenance varies and is published with the dataset. State data: USDA ARS PHZM 2023, NOAA Climate Normals, NRCS SSURGO.

When to Plant Mache in North Carolina

The frost window

Across North Carolina, the last spring hard freeze (28°F) clears between Mar 11 and Mar 24, and the first fall hard freeze lands between Nov 10 and Nov 25 (NOAA Regional Climate Centers ACIS, 1991-2020). Counting from the latest last freeze to the earliest first freeze, that's a 231-day window you can count on — up to 259 days on a mild site in a kind year. That marks the hard freeze, not the last light frost, so tender transplants usually wait another 2-3 weeks.

Frost hardiness

Mache takes cold down to about -5°F before a freeze kills it, so you can plant on the early side of North Carolina's window — even a few weeks before the final hard freeze. That is the point where cold damages growing tissue, not a winter-survival floor — an established perennial comes through far colder while dormant, which is what its hardiness zone tells you. We haven't confirmed this against a published source yet.

When to start the seed

Mache is direct-sown where it grows rather than started under cover, so there is no seed-tray head start to bank — North Carolina's dates above are the whole calendar for it. That makes the last-freeze date the binding constraint, and a warmer pocket of your own yard is worth more to this crop than it is to a transplanted one.

Days to maturity vs. the window

At 50 days to maturity (Growable Ground Plant Database), counting from the last hard freeze it ripens with 181 days to spare even in North Carolina's tightest freeze scenario — room for a later start or a second sowing.

Timing tuned to sub-state frost dates — Swain County, not the statewide average.

Frost window: NOAA Climate Normals 1991-2020. Plant timing fields: Growable Ground Plant Database — frost-free days from FAO ECOCROP, days to harvest from university Extension production guides, and growing-degree-day and chill-hour minimums that are compilation estimates rather than published figures. Your site's own frost dates can run earlier or later than the state range — a parcel report pins them down.

Growing Season Fit

Frost-free days

Mache wants 45+ frost-free days; a typical North Carolina site sees ~245 (NOAA Regional Climate Centers ACIS, 1991-2020). That leaves comfortable headroom for succession planting.

Growing degree days

Mache needs ~600 GDD (base 50°F) to ripen. We haven't confirmed this against a published source yet. The state median runs ~4537 GDD (from PRISM 1991-2020 climate normals), so North Carolina's typical season clears that easily.

GDD and chill-hour figures are computed from PRISM 1991-2020 monthly climate normals; frost-free days from NOAA Regional Climate Centers ACIS, 1991-2020. Each is the state median across its counties (P25/P75 span the within-state spread). Hardiness-zone range is USDA PHZM 2023.

Soil + Drainage Fit

Mache likes near-neutral soil (pH 6-7.5). That's the common-ground band across North Carolina's red clay (piedmont) and sandy loam (coastal) — a soil test confirms it for your site. It will grow across that whole span, but it does best between pH 6.5 and 7 — worth knowing before you decide whether a North Carolina soil test result is a problem or just a number. Drainage matters: this plant wants well (dry spells). If your North Carolina site is heavier clay or sits in a low spot, a raised bed lifts the roots above wet ground, or work in compost. pH range, preferred pH and drainage need: We haven't confirmed this against a published source yet.

Your land, not the state average

Whether mache is safe to eat from North Carolina soil is a block-by-block question, not a town-wide one — 33,708 documented contamination sites mean levels spike on some parcels and not the one next door. What mache takes up depends on the horizon its roots actually reach on your parcel, so only a test on your address settles it.

Check your parcel → Source: USDA NRCS SSURGO + EPA/state contamination databases.

Plant pH requirements: FAO ECOCROP and USDA PLANTS, with the remaining rows from other published sources or Growable Ground compilation. Drainage: FAO ECOCROP, with the remaining rows from other published sources or Growable Ground compilation. North Carolina soil profile from USDA NRCS SSURGO. Site-specific verification: a 30-minute soil test from your local Extension lab.

Before you plant mache for food

Anything you grow to eat takes up what is in the ground it grows in, so what is on record near you is worth knowing before mache goes in. What follows is North Carolina’s documented federal record at state scale — a screening signal, not a soil test, and not a statement about any one lot.

Safe to Grow Here?

What the federal record shows across North Carolina — and how to grow with it.

Federal record: High

We checked the federal record across North Carolina — 33,708 documented sites across 7 of the 8 source types we track.

The most significant on record: 464 Superfund sites. Sites tracked in EPA's Superfund program — from assessment-stage CERCLIS entries to confirmed National Priorities List cleanup sites.

North Carolina carries one of the heavier federal records we track — and that's not a verdict on your yard. Proximity to a documented site is information, not a diagnosis: nothing here says any particular parcel is affected. It does earn one concrete step — before food beds go in the ground, a professional soil test tells you exactly what you're working with, and raised beds of imported, lab-tested soil grow well almost anywhere in the meantime.

Know before you grow — the guide

Sources Checked

across North Carolina

Severity Distribution

across North Carolina

High307Moderate11,771Low21,630

Highest-Severity Sites

Mining Sites · Past Producer
Superfund · Superfund NPL
Superfund · Superfund NPL
Superfund · Superfund NPL
PFAS Sampling · PFAS Detected

Know Before You Grow

  • •Underground tanks leak petroleum as they age — near a former filling station, test the soil.
  • •TRI facilities report what they release. Check the wind — downwind beds catch more of it.
  • •Near a brownfield, a raised bed of imported, lab-tested soil lowers contact with the ground; it does not remove it.

Sources: EPA, USGS — 950K documented sites tracked nationwide across 8 federal source types.

What Else to Consider for Mache in North Carolina

The zone range tells you where mache is grown — but North Carolina growers also need to think about:

Red Piedmont clay is hard to work and drains poorly

Humidity drives significant disease pressure

Hurricane risk on the coastal plain

Growing mache here specifically

Because you eat the leaves of mache that sit in the soil, contamination matters more than for most crops — North Carolina has 33,708 documented sites, and lead concentrates block by block, not town-wide.

Test your soil for lead first, and if the reading is high grow mache in a raised bed of imported, lab-tested soil, which lowers contact with the ground but does not remove it. How to handle it →

What to actually do about these — and the constraints that apply to every North Carolina grower, not just mache — is covered on the North Carolina growing guide.

Timing shifts within North Carolina

North Carolina isn't one climate. In Swain County, the last hard freeze (28°F) holds until about Apr 27 — roughly 41 days later than the recorded state median — so plant mache to your county's window, not the statewide date.

Mache needs about 45 days of frost-free season to complete its cycle. Even Swain County — North Carolina’s shortest season at 178 frost-free days — clears that by 133 days, so season length isn’t the constraint anywhere in North Carolina. What varies is your own parcel.

Across North Carolina’s 100 counties the frost-free season runs from 178 days in Swain County to 303 days in Dare County — a spread of 125 days, which is why a single statewide planting date misleads. The median North Carolina county sees 245 frost-free days, leaving mache about 200 days of slack on a typical parcel — room for a second sowing where the season runs long.

County last-freeze dates and frost-free day counts: NOAA Regional Climate Centers ACIS (1991-2020), county 28°F freeze (earlier than the folk 32°F "last frost"). Mache's 45-day requirement: USDA PLANTS / Growable Ground plant database (minimum frost-free days). A parcel report resolves your address's own frost dates.

Pollinator + Wildlife Value

Mache draws honeybees (low value). Planting it near vegetable beds can lift fruit set on neighboring crops. Outdoors, mache can only work that bloom inside North Carolina's frost window — roughly 245 days, opening after the last 28°F freeze (Mar 11 - Mar 24) and closing at the first (Nov 10 - Nov 25), per NOAA Regional Climate Centers ACIS, 1991-2020. Pollinator value: We haven't confirmed this against a published source yet.

North Carolina Cooperative Extension

For North Carolina-specific cultivar recommendations, planting calendars, and pest pressure for mache, the canonical source is NC State Extension. Their fact sheets carry the local trial data we can't generalize across 50 states.

Is Mache native to North Carolina?

No — the USDA PLANTS Database lists Mache as introduced rather than native in the Lower 48, so it is not part of North Carolina's native flora. It grows here as a garden plant; pairing it with a few North Carolina natives keeps local pollinators fed too.

Looking for plants that belong here? The North Carolina growing guide lists plants that USDA PLANTS records growing in North Carolina and that Kew and NatureServe Explorer both list in its native range, leaving out any that NatureServe flags as exotic there or that our audit holds.

State records: USDA PLANTS Database state-distribution data (presence, not state-level nativity), accessed 2026-10-19.

Common Questions About Growing Mache in North Carolina

When can I plant Mache in North Carolina?

North Carolina's last spring hard freeze (28°F) clears between Mar 11 and Mar 24, and the first fall hard freeze lands between Nov 10 and Nov 25 (NOAA Regional Climate Centers ACIS, 1991-2020). Time outdoor planting to after the last hard freeze for your specific site — a further two to three weeks for anything tender — and count back from those dates for transplant scheduling.

Can Mache mature before first frost in North Carolina?

Yes — Mache matures in 50 days (Growable Ground Plant Database), and North Carolina's dependable hard-freeze-free window runs 231 days (NOAA Regional Climate Centers ACIS, 1991-2020), leaving 181 days of margin. Plant once the last hard freeze has passed — two to three weeks later for anything tender — and it ripens ahead of the first fall freeze.

What hardiness zone is Mache grown in across North Carolina?

North Carolina spans USDA hardiness zones 6a-9a (USDA ARS PHZM 2023). Mache carries a range of zones Data pending, so the overlap zones are where outdoor growing is most reliable.

How many frost-free days does a typical North Carolina site have?

A typical North Carolina site sees ~245 frost-free days per year (derived from NOAA Regional Climate Centers ACIS, 1991-2020). Mache needs 45+ frost-free days, so check whether your local microclimate runs above or below the state average before settling on a planting date. In cooler counties like Swain, the freeze-free season runs shorter than the state average, so verify your own county's window.

Is Mache native to North Carolina?

No — the USDA PLANTS Database lists Mache as introduced rather than native in the Lower 48, so it is not part of North Carolina's native flora. It grows here as a garden plant; pairing it with a few North Carolina natives keeps local pollinators fed too.

How should I amend the soil for Mache in North Carolina?

Mache prefers pH 6-7.5 and well (dry spells) drainage. We haven't confirmed this against a published source yet. That sits in the common-ground band across North Carolina soils — a 30-minute soil test from a local Extension lab confirms it for your specific site.

Will Mache actually grow on my specific land in North Carolina?

State-level zone + climate data is a sketch. A Growable Ground parcel report scores mache against your address's mapped soil pH, drainage, sun, and frost-date data drawn from USDA SSURGO, NOAA, and PRISM — not state averages.

Free to start

Check your specific parcel in North Carolina

State-level data is a sketch. Your Growable Ground report scores mache against your land's mapped soil, modelled sun, drainage, and frost data — not zone averages.

Three things about your lot that North Carolina mache averages can't show:

Your soil pHYour frost-free days — North Carolina averages 245Your sun & shade

We read public map data around North Carolina — soil, climate, flood, and parcel records. How we handle your address.

25+ data sources read at your address, not the North Carolina mache average

Explore More

Explore North Carolina county by county

North Carolina carries 100 counties with their own USDA zone — a sample of the growing pages for mache there:

Where else mache grows

Mache's zone band crosses state lines — these are the states closest to North Carolina in winter climate where it also has a page, plus the far ends of its range. Each one re-answers the question with that state's own record.

More to grow in North Carolina

North Carolina has a growing page for 1,011 plants — a rotating sample of the rest of the shelf.

Analysis by the Growable Ground research team, grounded in USDA PLANTS, USDA NRCS SSURGO, NOAA Climate Normals (1991-2020), and named Cooperative Extension sources. How we know →

Cite this dataset

Kirchick, M. (2026). Growable Ground Plant Database [Data set]. Zenodo. https://doi.org/10.5281/zenodo.21435643

Licensed CC BY-NC 4.0. DOI 10.5281/zenodo.21435643

Last updated: