Unlikely — Zone Mismatch
sisal hemp (zones 9-11) does not overlap with Kentucky's zone range (6a-7b). Growing outdoors is unlikely without significant protection.
2 zones short — what would close it
Sisal Hemp is hardy to zone 9, and the warmest ground in Kentucky is zone 7 — 2 zones short. Planted in open ground it will not survive a Kentucky winter. To grow it here, grow sisal hemp under glass — a greenhouse is the only lift this wide the engine models.
A greenhouse is the lift this needs. How a greenhouse changes what you can grow →
Zone math from 9-11 (plant) against 6-7 (Kentucky). Lift modeled by crop_engine Sprint 20B effective_zone_modifier (+2 zones) via api/fast_sections.py Unlock Engine v2.
Your yard isn't the whole zone.
Kentucky spans zones 6a-7b, but your yard has its own microclimate — slope, trees, and low spots shift frost and sun across a single parcel. Enter your address and we'll score sisal hemp against your land's actual soil, sun, and frost.
We read public map data for this spot — soil, climate, flood, and parcel records. How we handle your address.
No card required · your full report in seconds
Zone Comparison
Sisal Hemp Needs
- USDA Zones: 9-11
- Frost-Free Days: 150+
- Sun: Full Sun
Kentucky Has
- USDA Zones: 6a-7b
- Last Hard Freeze (28°F): Mar 27 - Apr 2
- First Hard Freeze (28°F): Nov 4 - Nov 10
- Annual Rainfall: 42-52 inches
- Common Soils: Silt loam, Clay loam, Limestone-derived
Plant Zone Range (zones 9-11)
Preferred Soil pH
Plant data: USDA PLANTS Database / Growable Ground plant catalog. State data: USDA ARS PHZM 2023, NOAA Climate Normals, NRCS SSURGO.
When to Plant Sisal Hemp in Kentucky
The frost window
Across Kentucky, the last spring hard freeze (28°F) clears between Mar 27 and Apr 2, and the first fall hard freeze lands between Nov 4 and Nov 10 (NOAA Regional Climate Centers ACIS, 1991-2020). Counting from the latest last freeze to the earliest first freeze, that's a 216-day window you can count on — up to 228 days on a mild site in a kind year. That marks the hard freeze, not the last light frost, so tender transplants usually wait another 2-3 weeks.
Frost tenderness
Sisal Hemp is frost-tender — its listed minimum temperature is 50°F (USDA PLANTS Database) — so set plants out two to three weeks PAST your local last hard freeze, not on it and not on the state's earliest date. The 28°F marker above is when killing freezes stop, not when light frost does.
Timing tuned to sub-state frost dates — Greenup County, not the statewide average.
Frost window: NOAA Climate Normals 1991-2020. Plant timing fields: USDA PLANTS Database. Your site's own frost dates can run earlier or later than the state range — a parcel report pins them down.
Growing Season Fit
The zone check says sisal hemp does not survive a Kentucky winter in the ground. The season figures below measure a different question — whether it could finish a season here at all — and they only bear on Kentucky under protection.
Frost-free days
Sisal Hemp wants 150+ frost-free days; a typical Kentucky site sees ~221 (NOAA Regional Climate Centers ACIS, 1991-2020). That leaves comfortable headroom for succession planting.
GDD and chill-hour figures are computed from PRISM 1991-2020 monthly climate normals; frost-free days from NOAA Regional Climate Centers ACIS, 1991-2020. Each is the state median across its counties (P25/P75 span the within-state spread). Hardiness-zone range is USDA PHZM 2023.
Soil + Drainage Fit
Sisal Hemp likes near-neutral soil (pH 5.5-8). That's the common-ground band across Kentucky's silt loam and clay loam — a soil test confirms it for your site. It will grow across that whole span, but it does best between pH 6 and 7.5 — worth knowing before you decide whether a Kentucky soil test result is a problem or just a number. Drainage matters: this plant wants well (dry spells). If your Kentucky site is heavier clay or sits in a low spot, raised beds or amendment with compost solve it.
Your land, not the state average
Kentucky's soils run mostly silt loam, but SSURGO maps the series, texture, and drainage under your exact parcel. Sisal Hemp needs about 19 inches of workable depth, so it is that horizon — not the surface — you are testing for. That map unit, not the state average, decides how sisal hemp performs.
Check your parcel → Source: USDA NRCS SSURGO.
Plant pH and drainage requirements from USDA PLANTS Database. Kentucky soil profile from USDA NRCS SSURGO. Site-specific verification: a 30-minute soil test from your local Extension lab.
Sisal Hemp in Kentucky — Quick Answer
- Verdict: Unlikely — Zone Mismatch
- Plant Zones: 9-11 (USDA PLANTS Database)
- State Zones: 6a-7b (USDA ARS PHZM 2023)
- Growing Season: 28°F hard freezes about Mar 27 - Apr 2 to Nov 4 - Nov 10 (NOAA Regional Climate Centers ACIS, 1991-2020)
What Else to Consider for Sisal Hemp in Kentucky
Zone compatibility tells you about winter cold survival — but Kentucky growers also need to think about:
Heavy clay soils in the Bluegrass region
High humidity promotes fungal diseases
Karst topography creates drainage unpredictability
Growing sisal hemp here specifically
Kentucky's soils run mostly silt loam (Alfisols), and whether that suits sisal hemp's pH 5.5–8.0 preference comes down to your exact parcel, not the statewide picture.
Pull your parcel's SSURGO map unit, test pH, and amend toward sisal hemp's 5.5–8.0 target before planting. How to handle it →
What to actually do about these — and the constraints that apply to every Kentucky grower, not just sisal hemp — is covered on the Kentucky growing guide.
Timing shifts within Kentucky
Kentucky isn't one climate. In Greenup County, the last hard freeze (28°F) holds until about Apr 13 — roughly 13 days later than the recorded state median — so plant sisal hemp to your county's window, not the statewide date.
Sisal Hemp needs about 150 days of frost-free season to complete its cycle. Even Greenup County — Kentucky’s shortest season at 195 frost-free days — clears that by 45 days, so season length isn’t the constraint anywhere in Kentucky. What varies is your own parcel.
County last-freeze dates and frost-free day counts: NOAA Regional Climate Centers ACIS (1991-2020), county 28°F freeze (earlier than the folk 32°F "last frost"). Sisal Hemp's 150-day requirement: USDA PLANTS / Growable Ground plant database (minimum frost-free days). A parcel report resolves your address's own frost dates.
Pollinator + Wildlife Value
Sisal Hemp draws native bees and moths (moderate value, Growable Ground Plant Database). Planting it near vegetable beds can lift fruit set on neighboring crops. Outdoors, sisal hemp can only work that bloom inside Kentucky's frost window — roughly 221 days, opening after the last 28°F freeze (Mar 27 - Apr 2) and closing at the first (Nov 4 - Nov 10), per NOAA Regional Climate Centers ACIS, 1991-2020.
Good to Know Before You Plant Sisal Hemp
Sisal Hemp is listed as toxic to dogs, cats (sap) at a mild level (ASPCA). Most listed plants only cause brief upset — a raised bed or a fenced corner usually keeps curious pets clear. Worth knowing for placement: in Kentucky this is a one-season plant and the first hard freeze (Nov 4 - Nov 10) takes it down, so the exposure above is a summer-long one rather than something standing in the bed all year.
Kentucky Cooperative Extension
For Kentucky-specific cultivar recommendations, planting calendars, and pest pressure for sisal hemp, the canonical source is University of Kentucky Cooperative Extension. Their fact sheets carry the local trial data we can't generalize across 50 states.
Is Sisal Hemp native to Kentucky?
No — the USDA PLANTS Database lists Sisal Hemp as introduced rather than native in the Lower 48, so it is not part of Kentucky's native flora. It grows here as a garden plant; pairing it with a few Kentucky natives keeps local pollinators fed too.
Looking for plants that belong here? The Kentucky growing guide lists USDA-documented natives for the state.
Native-range data: USDA PLANTS Database state-distribution records, accessed 2026-07-01.
Common Questions About Growing Sisal Hemp in Kentucky
When can I plant Sisal Hemp in Kentucky?
Kentucky's last spring hard freeze (28°F) clears between Mar 27 and Apr 2, and the first fall hard freeze lands between Nov 4 and Nov 10 (NOAA Regional Climate Centers ACIS, 1991-2020). Sisal Hemp is frost-tender — its listed minimum temperature is 50°F (USDA PLANTS Database) — so wait two to three weeks past your site's last hard freeze, when light frost has also stopped, before planting out.
What hardiness zone is Sisal Hemp grown in across Kentucky?
Kentucky spans USDA hardiness zones 6a-7b (USDA ARS PHZM 2023). Sisal Hemp carries a range of zones 9-11, so the overlap zones are where outdoor growing is most reliable.
How many frost-free days does a typical Kentucky site have?
A typical Kentucky site sees ~221 frost-free days per year (derived from NOAA Regional Climate Centers ACIS, 1991-2020). Sisal Hemp needs 150+ frost-free days, so check whether your local microclimate runs above or below the state average before settling on a planting date. In cooler counties like Greenup, the freeze-free season runs shorter than the state average, so verify your own county's window.
Is Sisal Hemp native to Kentucky?
No — the USDA PLANTS Database lists Sisal Hemp as introduced rather than native in the Lower 48, so it is not part of Kentucky's native flora. It grows here as a garden plant; pairing it with a few Kentucky natives keeps local pollinators fed too.
How should I amend the soil for Sisal Hemp in Kentucky?
Sisal Hemp prefers pH 5.5-8 and well (dry spells) drainage (FAO ECOCROP). That sits in the common-ground band across Kentucky soils — a 30-minute soil test from a local Extension lab confirms it for your specific site.
Will Sisal Hemp actually grow on my specific land in Kentucky?
State-level zone + climate data is a sketch. A Growable Ground parcel report scores sisal hemp against your address's exact soil pH, drainage, sun, and frost-date data drawn from USDA SSURGO, NOAA, and PRISM — not state averages.
Check your specific parcel in Kentucky
State-level data is a sketch. Your Growable Ground report scores sisal hemp against your parcel's exact soil, sun, drainage, and frost data — not zone averages.
Three things about your lot that Kentucky sisal hemp averages can't show:
We read public map data around Kentucky — soil, climate, flood, and parcel records. How we handle your address.
25+ data sources read at your address, not the Kentucky sisal hemp average
Explore More
Growing guides for sisal hemp
Analysis by the Growable Ground research team, grounded in USDA PLANTS, USDA NRCS SSURGO, NOAA Climate Normals (1991-2020), and named Cooperative Extension sources. How we know →
Cite this dataset
Kirchick, M. (2026). Growable Ground Plant Database [Data set]. Zenodo. https://doi.org/10.5281/zenodo.21435643
Licensed CC BY-NC 4.0. DOI 10.5281/zenodo.21435643
Last updated: