Unlikely — Zone Mismatch
velvet bean (zones 9-13) does not overlap with District of Columbia's zone range (7b-8a). Growing outdoors is unlikely without significant protection.
One zone short — what would close it
Velvet Bean is hardy to zone 9, and the warmest ground in District Of Columbia is zone 8 — 1 zone short. Planted in open ground it will not survive a District Of Columbia winter. To grow it here, grow velvet bean in a container and move it under cover for the coldest weeks, or give it a greenhouse.
Season extension and overwintering under cover both work at this margin. How to buy the weeks →
Zone math from 9-13 (plant) against 7-8 (District of Columbia). Lift modeled by crop_engine Sprint 20B effective_zone_modifier (+2 zones) via api/fast_sections.py Unlock Engine v2.
Your yard isn't the whole zone.
Velvet Bean is grown as an annual, so your winter zone isn't the deciding factor — your frost-free window is. A typical District of Columbia site runs ~254 frost-free days, but that is a state median, not your yard: slope, trees, and low spots move the last-frost date across a single parcel. Enter your address and we'll score velvet bean against your land's actual frost dates, sun, and soil.
We read public map data for this spot — soil, climate, flood, and parcel records. How we handle your address.
No card required · your full report in seconds
Zone Comparison
Velvet Bean Needs
- USDA Zones: 9-13
- Sun: Full Sun
- Mature size: 5 ft tall
- Drought tolerance: Medium
District of Columbia Has
- USDA Zones: 7b-8a
- Last Hard Freeze (28°F): Mar 15
- First Hard Freeze (28°F): Nov 24
- Annual Rainfall: 39-43 inches
- Common Soils: Urban fill, Silt loam, Clay loam
Plant Zone Range (zones 9-13)
Preferred Soil pH
Plant data: USDA PLANTS Database / Growable Ground plant catalog. State data: USDA ARS PHZM 2023, NOAA Climate Normals, NRCS SSURGO.
When to Plant Velvet Bean in District of Columbia
The frost window
Across District of Columbia, the last spring hard freeze (28°F) clears between Mar 15 and Mar 15, and the first fall hard freeze lands between Nov 24 and Nov 24 (NOAA Regional Climate Centers ACIS, 1991-2020). Counting from the latest last freeze to the earliest first freeze, that's a 254-day window you can count on — up to 254 days on a mild site in a kind year. That marks the hard freeze, not the last light frost, so tender transplants usually wait another 2-3 weeks.
Frost tenderness
Velvet Bean is frost-tender — its listed minimum temperature is 50°F (USDA PLANTS Database) — so set plants out two to three weeks PAST your local last hard freeze, not on it and not on the state's earliest date. The 28°F marker above is when killing freezes stop, not when light frost does.
When to start the seed
Velvet Bean is direct-sown where it grows rather than started under cover, so there is no seed-tray head start to bank — District of Columbia's dates above are the whole calendar for it. That makes the last-freeze date the binding constraint, and a warmer pocket of your own yard is worth more to this crop than it is to a transplanted one.
Days to maturity vs. the window
At 120 days to maturity (USDA PLANTS Database), counting from the last hard freeze it ripens with 134 days to spare even in District of Columbia's tightest freeze scenario — room for a later start or a second sowing.
Frost window: NOAA Climate Normals 1991-2020. Plant timing fields: USDA PLANTS Database. Your site's own frost dates can run earlier or later than the state range — a parcel report pins them down.
Growing Season Fit
The zone check says velvet bean does not survive a District of Columbia winter in the ground. The season figures below measure a different question — whether it could finish a season here at all — and they only bear on District of Columbia under protection.
Days to maturity
Velvet Bean matures in ~120 days (Growable Ground Plant Database). A typical District of Columbia site has ~254 frost-free days, so plenty of room for a second succession.
Growing degree days
Velvet Bean needs ~2500 GDD (base 50°F) to ripen. The state median runs ~4070 GDD (from PRISM 1991-2020 climate normals), so District of Columbia's typical season clears that easily.
GDD and chill-hour figures are computed from PRISM 1991-2020 monthly climate normals; frost-free days from NOAA Regional Climate Centers ACIS, 1991-2020. Each is the state median across its counties (P25/P75 span the within-state spread). Hardiness-zone range is USDA PHZM 2023.
Soil + Drainage Fit
Velvet Bean tolerates a wide pH range (pH 4-7.5) — 3.5 units, acid ground through alkaline — so soil acidity is rarely what limits it in District of Columbia. A soil test is still worth having, but for what else it tells you about this site, not to clear this plant. It will grow across that whole span, but it does best between pH 5 and 6.5 — worth knowing before you decide whether a District of Columbia soil test result is a problem or just a number. Drainage matters: this plant wants well (dry spells). If your District of Columbia site is heavier clay or sits in a low spot, raised beds or amendment with compost solve it.
Your land, not the state average
District Of Columbia's soils run mostly silt loam, but SSURGO maps the series, texture, and drainage under your exact parcel. Velvet Bean needs about 19 inches of workable depth, so it is that horizon — not the surface — you are testing for. That map unit, not the state average, decides how velvet bean performs.
Check your parcel → Source: USDA NRCS SSURGO.
Plant pH and drainage requirements from USDA PLANTS Database. District of Columbia soil profile from USDA NRCS SSURGO. Site-specific verification: a 30-minute soil test from your local Extension lab.
Velvet Bean in District of Columbia — Quick Answer
- Verdict: Unlikely — Zone Mismatch
- Plant Zones: 9-13 (USDA PLANTS Database)
- State Zones: 7b-8a (USDA ARS PHZM 2023)
- Growing Season: 28°F hard freezes about Mar 15 to Nov 24 (NOAA Regional Climate Centers ACIS, 1991-2020)
- Days to Maturity: 120 days
What Else to Consider for Velvet Bean in District of Columbia
Zone compatibility tells you about winter cold survival — but District of Columbia growers also need to think about:
Dense urban siting means small lots, compacted fill soils, and limited sun
Summer heat and humidity promote fungal diseases
The urban heat-island effect pushes summer temperatures above surrounding suburbs
Growing velvet bean here specifically
District Of Columbia's soils run mostly silt loam (Ultisols), and whether that suits velvet bean's pH 4.0–7.5 preference comes down to your exact parcel, not the statewide picture.
Pull your parcel's SSURGO map unit, test pH, and amend toward velvet bean's 4.0–7.5 target before planting. How to handle it →
What to actually do about these — and the constraints that apply to every District of Columbia grower, not just velvet bean — is covered on the District of Columbia growing guide.
Pollinator + Wildlife Value
Velvet Bean draws native bees (moderate value, Growable Ground Plant Database). Planting it near vegetable beds can lift fruit set on neighboring crops. Outdoors, velvet bean can only work that bloom inside District of Columbia's frost window — roughly 254 days, opening after the last 28°F freeze (Mar 15) and closing at the first (Nov 24), per NOAA Regional Climate Centers ACIS, 1991-2020.
Good to Know Before You Plant Velvet Bean
Velvet Bean is listed as toxic to dogs, cats (seeds, pods) at a moderate level (Cornell). Most listed plants only cause brief upset — a raised bed or a fenced corner usually keeps curious pets clear. Worth knowing for placement: in District of Columbia this is a one-season plant and the first hard freeze (Nov 24) takes it down, so the exposure above is a summer-long one rather than something standing in the bed all year.
District of Columbia Cooperative Extension
For District of Columbia-specific cultivar recommendations, planting calendars, and pest pressure for velvet bean, the canonical source is UDC Center for Urban Agriculture. Their fact sheets carry the local trial data we can't generalize across 50 states.
Is Velvet Bean native to District of Columbia?
No — the USDA PLANTS Database lists Velvet Bean as introduced rather than native in the Lower 48, so it is not part of District of Columbia's native flora. It grows here as a garden plant; pairing it with a few District of Columbia natives keeps local pollinators fed too.
Looking for plants that belong here? The District of Columbia growing guide lists USDA-documented natives for the state.
Native-range data: USDA PLANTS Database state-distribution records, accessed 2026-07-01.
Common Questions About Growing Velvet Bean in District of Columbia
When can I plant Velvet Bean in District of Columbia?
District of Columbia's last spring hard freeze (28°F) clears between Mar 15 and Mar 15, and the first fall hard freeze lands between Nov 24 and Nov 24 (NOAA Regional Climate Centers ACIS, 1991-2020). Velvet Bean is frost-tender — its listed minimum temperature is 50°F (USDA PLANTS Database) — so wait two to three weeks past your site's last hard freeze, when light frost has also stopped, before planting out.
Can Velvet Bean mature before first frost in District of Columbia?
Yes — Velvet Bean matures in 120 days (USDA PLANTS Database), and District of Columbia's dependable hard-freeze-free window runs 254 days (NOAA Regional Climate Centers ACIS, 1991-2020), leaving 134 days of margin. Plant once the last hard freeze has passed — two to three weeks later for anything tender — and it ripens ahead of the first fall freeze.
What hardiness zone is Velvet Bean grown in across District of Columbia?
District of Columbia spans USDA hardiness zones 7b-8a (USDA ARS PHZM 2023). Velvet Bean carries a range of zones 9-13, so the overlap zones are where outdoor growing is most reliable.
How many frost-free days does a typical District of Columbia site have?
A typical District of Columbia site sees ~254 frost-free days per year (derived from NOAA Regional Climate Centers ACIS, 1991-2020). Velvet Bean should be matched against that window, so check whether your local microclimate runs above or below the state average before settling on a planting date.
Is Velvet Bean native to District of Columbia?
No — the USDA PLANTS Database lists Velvet Bean as introduced rather than native in the Lower 48, so it is not part of District of Columbia's native flora. It grows here as a garden plant; pairing it with a few District of Columbia natives keeps local pollinators fed too.
How should I amend the soil for Velvet Bean in District of Columbia?
Velvet Bean tolerates pH 4-7.5 and well (dry spells) drainage (FAO ECOCROP). That is a 3.5-unit span, acid ground through alkaline, so pH is rarely what limits this plant on a District of Columbia site — amend for drainage and organic matter first.
Will Velvet Bean actually grow on my specific land in District of Columbia?
State-level zone + climate data is a sketch. A Growable Ground parcel report scores velvet bean against your address's exact soil pH, drainage, sun, and frost-date data drawn from USDA SSURGO, NOAA, and PRISM — not state averages.
Check your specific parcel in District of Columbia
State-level data is a sketch. Your Growable Ground report scores velvet bean against your parcel's exact soil, sun, drainage, and frost data — not zone averages.
Three things about your lot that District of Columbia velvet bean averages can't show:
We read public map data around District of Columbia — soil, climate, flood, and parcel records. How we handle your address.
25+ data sources read at your address, not the District of Columbia velvet bean average
Explore More
Growing guides for velvet bean
Analysis by the Growable Ground research team, grounded in USDA PLANTS, USDA NRCS SSURGO, NOAA Climate Normals (1991-2020), and named Cooperative Extension sources. How we know →
Cite this dataset
Kirchick, M. (2026). Growable Ground Plant Database [Data set]. Zenodo. https://doi.org/10.5281/zenodo.21435643
Licensed CC BY-NC 4.0. DOI 10.5281/zenodo.21435643
Last updated: