Yes — Strong Match
garden tomato (zones 2-11) covers every zone District of Columbia contains (7b-8a), so hardiness is not what limits it anywhere in the state.
Tomato in District of Columbia — the short answer
Tomato in District of Columbia: hardy in zones 2–11, full sun, against a state median of ~254 frost-free days.
- Plant zones
- 2-11
- Manual horticultural correction (source not retained); NC State Extension and Missouri Botanical Garden, with the remaining rows from other published sources or Growable Ground compilation
- District of Columbia zones
- 7b-8a
- USDA PHZM 2023
- Frost window
- Mar 15 – Nov 24
- NOAA RCC ACIS 1991-2020, 28°F
- Typical season
- ~254 days
- NOAA Regional Climate Centers ACIS, 1991-2020
- Days to maturity
- 75 days
- Growable Ground Plant Database
Plant data: Growable Ground Plant Database, compiled from FAO ECOCROP, USDA PLANTS and university Extension sources — per-field provenance varies and is published with the dataset.
Your yard isn't the whole zone.
Tomato is grown as an annual, so your winter zone isn't the deciding factor — your frost-free window is. A typical District of Columbia site runs ~254 frost-free days, but that is a state median, not your yard: slope, trees, and low spots move the last-frost date across a single parcel. Enter your address and we'll score tomato against your land's actual frost dates, sun, and soil.
We read public map data for this spot — soil, climate, flood, and parcel records. How we handle your address.
No card required · your full report in seconds
Where in District of Columbia Fits Best
Even within District of Columbia's zones 7b-8a, county microclimates differ enough to change what thrives. These counties carry the closest zone match for tomato (USDA PHZM 2023):
Zone Comparison
Tomato Needs
- USDA Zones: 2-11
- Frost-Free Days: 70+
- Sun: Full Sun
- Mature size: 6 ft tall
- Picking window: ~75 days of harvest
- Drought tolerance: Low
District of Columbia Has
- USDA Zones: 7b-8a
- Last Hard Freeze (28°F): Mar 15
- First Hard Freeze (28°F): Nov 24
- Annual Rainfall: 39-43 inches
- Common Soils: Urban fill, Silt loam, Clay loam
Plant Zone Range (zones 2-11)
Preferred Soil pH
Plant data: Growable Ground Plant Database, compiled from FAO ECOCROP, USDA PLANTS, and university Extension sources — per-field provenance varies and is published with the dataset. State data: USDA ARS PHZM 2023, NOAA Climate Normals, NRCS SSURGO.
When to Plant Tomato in District of Columbia
The frost window
Across District of Columbia, the last spring hard freeze (28°F) clears between Mar 15 and Mar 15, and the first fall hard freeze lands between Nov 24 and Nov 24 (NOAA Regional Climate Centers ACIS, 1991-2020). Counting from the latest last freeze to the earliest first freeze, that's a 254-day window you can count on — up to 254 days on a mild site in a kind year. That marks the hard freeze, not the last light frost, so tender transplants usually wait another 2-3 weeks.
When to start the seed
Those dates are when tomato goes out, not when it starts. It is sown under cover about 7 weeks ahead, so counting back from District of Columbia's late-side last freeze of Mar 15 is what fixes your sowing date — and a yard that clears frost earlier than the state's late date starts earlier still.
Days to maturity vs. the window
At 75 days to maturity (Growable Ground Plant Database), counting from the last hard freeze it ripens with 179 days to spare even in District of Columbia's tightest freeze scenario — room for a later start or a second sowing.
Frost window: NOAA Climate Normals 1991-2020. Plant timing fields: Growable Ground Plant Database — frost-free days from FAO ECOCROP, days to harvest from university Extension production guides, and growing-degree-day and chill-hour minimums that are compilation estimates rather than published figures. Your site's own frost dates can run earlier or later than the state range — a parcel report pins them down.
Growing Season Fit
The zone check says tomato survives winter here. Whether the season is long enough — and warm enough — is a different question.
Frost-free days
Tomato wants 70+ frost-free days; a typical District of Columbia site sees ~254 (NOAA Regional Climate Centers ACIS, 1991-2020). That leaves comfortable headroom for succession planting.
Growing degree days
Tomato needs ~2200 GDD (base 50°F) to ripen. The state median runs ~4070 GDD (from PRISM 1991-2020 climate normals), so District of Columbia's typical season clears that easily.
GDD and chill-hour figures are computed from PRISM 1991-2020 monthly climate normals; frost-free days from NOAA Regional Climate Centers ACIS, 1991-2020. Each is the state median across its counties (P25/P75 span the within-state spread). Hardiness-zone range is USDA PHZM 2023.
Soil + Drainage Fit
Tomato likes near-neutral soil (pH 5-7.5). That's the common-ground band across District of Columbia's urban fill and silt loam — a soil test confirms it for your site. It will grow across that whole span, but it does best between pH 5.5 and 6.8 — worth knowing before you decide whether a District of Columbia soil test result is a problem or just a number. Drainage matters: this plant wants well (dry spells). If your District of Columbia site is heavier clay or sits in a low spot, raised beds or amendment with compost solve it.
Plant pH requirements: FAO ECOCROP and USDA PLANTS, with the remaining rows from other published sources or Growable Ground compilation. Drainage: FAO ECOCROP, with the remaining rows from other published sources or Growable Ground compilation. District of Columbia soil profile from USDA NRCS SSURGO. Site-specific verification: a 30-minute soil test from your local Extension lab.
Before you plant tomato for food
Anything you grow to eat takes up what is in the ground it grows in, so what is on record near you is worth knowing before tomato goes in. What follows is District of Columbia’s documented federal record at state scale — a screening signal, not a soil test, and not a statement about any one lot.
Safe to Grow Here?
What the federal record shows across District of Columbia — and how to grow with it.
We checked the federal record across District of Columbia — 2,435 documented sites across 6 of the 9 source types we track.
The most significant on record: 50 Superfund sites. Sites tracked in EPA's Superfund program — from assessment-stage CERCLIS entries to confirmed National Priorities List cleanup sites.
There's a meaningful federal record across District of Columbia — worth a look before you plant food, not a reason to hold back from growing. Proximity to a documented site is information, not a diagnosis of any one yard. A soil test before new food beds is the sensible precaution here, and the map shows exactly which sites sit where, so you can see what's actually near you.
Sources Checked
across District of Columbia
Severity Distribution
across District of Columbia
Highest-Severity Sites
A note from Gnorman
What an experienced grower watches for around here
In and around District of Columbia, Superfund runs higher than the national average — 50 sites across District of Columbia. It's not cause for alarm — it's worth knowing, and there's a sensible way to grow around it.
Superfund: Superfund sites represent the most severe contamination in the federal system.
Commission professional soil testing before any food production (test for heavy metals, VOCs, and SVOCs).
Sources: EPA, USGS — 1.8M documented sites tracked nationwide across 9 federal source types.
What Else to Consider for Tomato in District of Columbia
Zone compatibility tells you about winter cold survival — but District of Columbia growers also need to think about:
Dense urban siting means small lots, compacted fill soils, and limited sun
Summer heat and humidity promote fungal diseases
The urban heat-island effect pushes summer temperatures above surrounding suburbs
What to actually do about these — and the constraints that apply to every District of Columbia grower, not just tomato — is covered on the District of Columbia growing guide.
Pollinator + Wildlife Value
Tomato draws native bees (moderate value, Growable Ground Plant Database). Planting it near vegetable beds can lift fruit set on neighboring crops. Outdoors, tomato can only work that bloom inside District of Columbia's frost window — roughly 254 days, opening after the last 28°F freeze (Mar 15) and closing at the first (Nov 24), per NOAA Regional Climate Centers ACIS, 1991-2020.
District of Columbia Cooperative Extension
For District of Columbia-specific cultivar recommendations, planting calendars, and pest pressure for tomato, the canonical source is UDC Center for Urban Agriculture. Their fact sheets carry the local trial data we can't generalize across 50 states.
Is Tomato native to District of Columbia?
No — the USDA PLANTS Database lists Tomato as introduced rather than native in the Lower 48, so it is not part of District of Columbia's native flora. It grows here as a garden plant; pairing it with a few District of Columbia natives keeps local pollinators fed too.
Looking for plants that belong here? The District of Columbia growing guide lists USDA-documented natives for the state.
Native-range data: USDA PLANTS Database state-distribution records, accessed 2026-07-01.
Common Questions About Growing Tomato in District of Columbia
When can I plant Tomato in District of Columbia?
District of Columbia's last spring hard freeze (28°F) clears between Mar 15 and Mar 15, and the first fall hard freeze lands between Nov 24 and Nov 24 (NOAA Regional Climate Centers ACIS, 1991-2020). Time outdoor planting to after the last hard freeze for your specific site — a further two to three weeks for anything tender — and count back from those dates for transplant scheduling.
Can Tomato mature before first frost in District of Columbia?
Yes — Tomato matures in 75 days (Growable Ground Plant Database), and District of Columbia's dependable hard-freeze-free window runs 254 days (NOAA Regional Climate Centers ACIS, 1991-2020), leaving 179 days of margin. Plant once the last hard freeze has passed — two to three weeks later for anything tender — and it ripens ahead of the first fall freeze.
What hardiness zone is Tomato grown in across District of Columbia?
District of Columbia spans USDA hardiness zones 7b-8a (USDA ARS PHZM 2023). Tomato carries a range of zones 2-11, so the overlap zones are where outdoor growing is most reliable.
How many frost-free days does a typical District of Columbia site have?
A typical District of Columbia site sees ~254 frost-free days per year (derived from NOAA Regional Climate Centers ACIS, 1991-2020). Tomato needs 70+ frost-free days, so check whether your local microclimate runs above or below the state average before settling on a planting date.
Is Tomato native to District of Columbia?
No — the USDA PLANTS Database lists Tomato as introduced rather than native in the Lower 48, so it is not part of District of Columbia's native flora. It grows here as a garden plant; pairing it with a few District of Columbia natives keeps local pollinators fed too.
How should I amend the soil for Tomato in District of Columbia?
Tomato prefers pH 5-7.5 and well (dry spells) drainage (FAO ECOCROP). That sits in the common-ground band across District of Columbia soils — a 30-minute soil test from a local Extension lab confirms it for your specific site.
Will Tomato actually grow on my specific land in District of Columbia?
State-level zone + climate data is a sketch. A Growable Ground parcel report scores tomato against your address's exact soil pH, drainage, sun, and frost-date data drawn from USDA SSURGO, NOAA, and PRISM — not state averages.
Check your specific parcel in District of Columbia
State-level data is a sketch. Your Growable Ground report scores tomato against your parcel's exact soil, sun, drainage, and frost data — not zone averages.
Three things about your lot that District of Columbia tomato averages can't show:
We read public map data around District of Columbia — soil, climate, flood, and parcel records. How we handle your address.
25+ data sources read at your address, not the District of Columbia tomato average
Explore More
Growing guides for tomato
Last updated: